It can be applied as-is to clean, dry, oil-free surfaces with a cloth, cotton swab, sponge, your finger... or thin it with paint thinner to create a paste, paint, stain or wash. Smooth surfaces should be slightly roughened with fine grit sandpaper or steel wool before application. Gilders Paste dries to the touch in 10-15 minutes and completely dries in 12 hours with no tacky residue. One tin of Gilders Paste covers over 30 square feet of surface area. Choose from 9 UV resistant colors which can be layered to create stunning and unique finishes and textures!
FAQ: product is hard, is there anything I can do to rejuvenate the product.-Yes, just add a few drops of either; paint thinner, mineral spirits, turpentine or Turpenoid (turpentine substitute) knife in and mix. You're ready to go. The ability to rejuvenate this product allows a long shelve life. There is no need to mix up the whole tin, just mix what you need as you need it. Gilders Paste goes a long way. Important: Do not use any oil base cleaners/solvents such as Turpenoid Natural. The oil content of these type of cleaners/solvents will not allow the Gilders Paste to dry and will remain wet or tacky for days to weeks. If you have accidentally used this type cleaner/solvent leave the tin open until completely dried out and then follow the suggestion for rejuvenation above. ""
Recently Viewed Items
You may also like
Time Zone Check
YOUR LOCAL TIMEZONE IS AUTOMATICALLY SELECTED. You may need to change this setting if you are registering from a location other than your hometown.
THE SESSION TIME WILL BE SHOWN IN YOUR LOCAL TIME
IF NO SESSION TIMES ARE SHOWN, THIS MEANS THE SESSION TIME IS OUTSIDE YOUR LOCAL TIMEZONE.